How to Maintain the Mechanical Replica Watch Movement?

luxury watch maintenance tip

Watches are one of the essential tools in our lives, and many people have the habit of wearing watches for travel. Among the replica watches, the most valuable ones are mechanical watches. Mechanical watches are more careful than quartz watches in use, especially the movement of mechanical replica watches. Today, we’ll will introduce to you how to maintain the mechanical watch movement!

luxury watch maintenance tip

Wear Properly, Avoid Vibration

Although the replica watch is shockproof, it is easy to break the tip of the balance shaft or the journal of the wheel train when the external impact is strong, and it can also cause the vibration of the fast and slow hands to affect the travel time. Replacement in daily life: wear a mechanical replica watch for static activities, and wear a quartz watch for sports, so that the time used can be adjusted according to local conditions, which will help prolong the service life of the watch.

luxury watch maintenance tip

Prevent Magnetization

Although the replica watch is made of non-magnetic materials that are not easily magnetized, the travel time is greatly affected by the magnetic field, such as the magnetic buckle on the TV, next to the radio speaker, backpack or purse.

luxury watch maintenance tip

Avoid Water

Try not to take the replica watch to swim or wash clothes. Once it rains or gets wet, you can’t pull out the crown to adjust the watch at this time, but dry it immediately. Sea water is even more untouchable. Even if the replica watch is marked waterproof, it can only be guaranteed waterproof for one year, because the waterproof ring of the watch will be tired after a whole year of wear and tear, plus various inevitable external factors such as sweat and dust, so after one year the waterproof ring must be replaced with a new one, otherwise it will not have the function of waterproofing. Since the crown head is protruding, try to avoid it from being bumped. Also, pay attention to the gap between the crown head and the case. If it is too small, it will affect the operation, but if it is too large, it will affect the waterproof performance and it will not look good at the same time.

luxury watch maintenance tip

Long-term Unused Replica Watch Storage

Do not get your watch placed in a suitcase with mothballs or health balls, the oil on the replica watch would deteriorate and the time of the watch will be inaccurate. Wind up or wear it every month to ensure flexible internal activities.

luxury watch maintenance tip

Maintenance Tips:

1. Any replica watch should not be worn in warm water or in the bathroom, even if your watch is a waterproof watch, because the sealing roll rubber of the replica watch is easy to age when heated, and the surrounding water vapor molecules are relatively small, which can easily penetrate into the case , causing damage to the internal machinery.
2. If the replica watch is abnormal, it should be sent to a special watch shop for inspection immediately.
3. The mechanical automatic replica watch must be in the case of sufficient activity, that is, it must be worn for more than 10 hours a day before it can operate normally.
4. Different replica watches should be worn on different occasions. For example, it is best to choose a sports watch with excellent waterproof and shock resistance when exercising.
5. If there is a watch marked WATER RESESTENT or 3ATM on the watch cover, it is generally only suitable for splashes or light rain without pressure.
6. Since the internal mechanical structure of each replica watch is different, under normal use, the error of a mechanical watch or a mechanical automatic watch is within 30 seconds per day (this standard is promulgated by the national ministries and commissions), while the error of a quartz watch is The error is lower and more accurate.

luxury watch maintenance tip
Your Mechanical Replica Watch Suddenly Stopped Running?

Your mechanical replica watch suddenly stopped running- this problem would be encountered by most people. People who have worn a mechanical watch have such a question. So why is this happening on my replica watch ? Let us tell you below!

For self-winding watches that have not been worn for more than 40 hours, the crown should be turned 20 laps before wearing again to re-start the drive system of the movement. People who have worn watches for a long time generally know how to solve this kind of problem, but those who have just started wearing replica watches may not know what is going on. If it is a mechanical watch, it may not be working hard, and it will be fine if it is done regularly.

luxury watch maintenance tip

Whether it is a manual or automatic winding watch, its principle is to run by the drive of mechanical gears and springs. The rotation will inevitably cause friction, so it must be refueled and lubricated after a long time of use to reduce the wear rate of parts.

A replica watch with a manual winding movement should be wound once a day at the same time as much as possible, so that the watch has enough energy to operate in the next 24 hours. The energy of a replica watch with an automatic winding movement comes from the movement of the wearer’s arm, so it does not need to be wound manually under normal wearing conditions. Only when the wearer’s exercise is not enough to add enough energy to the mainspring, the method of manual winding can be used.

Wrap Up

It is a very troublesome thing if your favorite watch breaks down. After all, it will cost a lot of money to buy a watch you like. Moreover, because the replica watches are too delicate, it is not so easy to repair. Therefore, it is very necessary to have a good understanding of how to maintain your replica watch. If you have any questions, you can also leave a message in the comment area, we will answer when we see it, or write the content you are interested in in our future blogs!